Contact icon_arrow_down_small

water treatment

Corrosion protection clarifies many things. Also rust water.
From unappetizing brown tap water to pitting to pipe breakage with water damage: Corrosion can be very treacherous - and really expensive. Prevent it: With corrosion protection from perma-trade Wassertechnik.

Brown water from the tap?

Troubled water pleasure: Corrosion and its consequences.

Pipe burst and repairs.

3000 water damages a day.

Corrosion in domestic installations repeatedly causes damage such as pitting and burst pipes. The repair itself is usually the lesser evil. Worse are the consequential damages. And their costs. If, for example, the apartment or building is uninhabitable after a pipe burst and drying equipment has to run for weeks to prevent the formation of mould.

Rust water and blocked aerators.

Corrosion also damages household appliances.

Apart from brown broth and reddish brown stains on the laundry, rust in the pipes brings even more trouble. The iron oxide particles contained in rust water can destroy seals and cause clogged fine jet regulators.

Reduced drinking water quality

Rust water is a breeding ground for germs.

Bacteria love rust water, unfortunately. The higher the iron concentration in drinking water, the more bacteria that use iron for their metabolism cavort in the pipes. Their excreted products then form biofilms or lead to blockages and are a good growth site for pathogens.

Brown water from the tap?

We clarify this for you: an all-round protective layer in sight!

In order to avoid the horror scenarios described above, a preventive water treatment is more than recommendable. A highly effective measure against corrosion is the formation of a natural and homogeneous protective layer in the pipes, as it can be actively produced with our corrosion protection system permasolvent – in an environmentally friendly and sustainable way.

Active against corrosion with permasolvent

How to protect your pipes against rust

With permasolvent active, the resulting corrosion products can themselves be cleverly converted into a protective shield: If these are deposited as homogeneously as possible on the pipe walls, an all-round protective layer is created which counteracts further material removal. It also makes it much more difficult for bacteria to settle in. At the same time, such a protective layer ensures that no undesirable ventilation elements are formed that can infiltrate foreign bodies such as sand and thus cause pitting. Let the water work for you and use permasolvent to actively set sustainable protective mechanisms in motion.

permasolvent active for sustainable preservation.

Preventive and retroactive.

permasolvent aktiv has a lasting effect: The environmentally friendly system not only protects against corrosion phenomena preventively: In combination with coarse jet regulators, which increase the volume flow, and a rust water filter, even existing rust water can be reduced. Existing corrosion products are degraded again. Last but not least, oxygen activation has a positive influence on the quality of drinking water – completely natural, chemical-free and resource-saving!

The solution for corrosion is so simple and efficient:

Lots of whirl for optimum corrosion protection!

permasolvent active combines our patented permanent magnetic functional principle with special water turbulence effects: The water flows through an alternating magnetic field generated by ring-shaped permanent magnets with alternating polarity. In addition, there is a swirl device in the inlet of the device to increase the flow velocity. For optimum corrosion protection, we recommend that in addition to the permasolvent active installed in the central cold water inlet, a second device matched to the hot water range be used in the storage tank outlet.

Corrosion protection from perma-trade.

Clear thing: All your advantages at a glance.

They ensure value retention and inventory protection.

They ensure value retention and inventory protection.

Whether a detached house or a large installation: permasolvent active limescale protection can be variably adapted to your requirements. In this way you secure your existing drinking water installation and make a lasting contribution to maintaining the value of your property.

They protect your sanitary installation.

They protect your sanitary installation.

Rusty water is neither beautiful to look at nor particularly hygienic. With the right corrosion protection, permanent and lasting relief can be achieved. This ensures clear conditions and improved drinking water quality. And all this without great effort: because permasolvent aktiv can be installed without a waste water or electricity connection and then works maintenance-free.

You enjoy vitalized, clear and hygienic drinking water.

You enjoy vitalized, clear and hygienic drinking water.

Our completely maintenance-free devices not only protect against corrosion as a preventive measure and can even reduce existing rust water afterwards. Due to their special mode of action, they also ensure oxygen activation of drinking water and refine its quality. All this in a completely natural and resource-conserving way.

You save costs and trouble for expensive repairs.

You save costs and trouble for expensive repairs.

Pitting, pipe burst, water damage. Corrosion can have expensive consequences and also cost a lot of nerves. So it is much more clever to invest in a maintenance-free corrosion protection system where you have no further consequential costs.

For value retention and inventory protection

Maintenance- and chemical-free corrosion protection to maintain the value of your property and secure its existence with permasolvent active.

FAQ

Any questions? Here are the most important answers for you:

When brown water flows out of the tap, the pleasure is clouded, but the case is clear: massive corrosion processes are already taking place in your pipes. You should urgently contact a specialist company you trust.

Decisive for the formation of rust water in the pipes is the insufficient transport of oxygen, which is dissolved as a natural element in our water. Possible causes for this are insufficient water flow or insufficient oxygen content in the water. Often, due to oversized pipelines, not enough oxygen can reach the pipe wall. In practice, this looks as follows: A protective layer forms on its own in places that come into sufficient contact with oxygen. In between, however, there are places that are not sufficiently supplied with oxygen: This creates an oxygen gradient – and consequently corrosion! The permasolvent active system offers an effective solution. During installation, all fine sieves on the fittings should be replaced with coarse jet regulators. This leads to an improvement of the flow conditions in the pipelines and also improves the rinsing effect of degraded corrosion products. These coarse jet regulators should remain installed for at least 6 months.

Pipelines can only be permanently secured by creating a homogeneous protective layer. Our corrosion protection system works very actively on this in the truest sense of the word. It activates the oxygen in drinking water: the oxygen molecules are present in the water in small gas bubbles. This activated oxygen is now better able to form a uniform (homogeneous) protective layer on the inner wall of the pipe. Thanks to this, the pipes are then permanently protected against corrosion if sufficient water flows.

What a nice answer to a justified question: No further costs in sight! The permasolvent active series works on a permanent magnetic basis. This means that no electricity is consumed. There are no follow-up costs. And the devices are completely maintenance-free.

permasolvent active Corrosion protection systems

corrosion protection

permasolvent active Corrosion protection systems

permasolvent aktiv Korrosionsschutz

Die wartungsfreien Geräte sorgen für für Bestandssicherung und Werterhalt Ihrer Trinkwasserinstallation

permasolvent active Corrosion protection systems

permasolvent active Corrosion protection systems

corrosion protection

Environmentally friendly corrosion protection. For value retention and inventory protection.

Corrosion can do many things. First and foremost: cost-intensive pipe damage can become the personal horror of every homeowner. Prevent this with a maintenance-free corrosion protection system: permasolvent active. It offers you permanent protection against corrosive pipelines made of copper or galvanised steel – completely without chemical additives or consequential costs. At the same time, the system’s mode of operation activates oxygen in your drinking water.

Wartungs- und chemiefreier Korrosionsschutz

Wartungs- und chemiefreier Korrosionsschutz

Werterhalt und Bestandssicherung Ihrer Immobilie.

Werterhalt und Bestandssicherung Ihrer Immobilie.